Contrary to popular belief there, is no rule of thumb for sizing a system to a home. Depending upon the construction of your home, one (1) ton of air conditioning can cool anywhere from 300 to 800 square feet of home. The only way to insure the size of the system you purchase will be large enough to cool your home, but not any larger than you need, is to have your home’s individual heating and cooling needs evaluated by a licensed professional.

The most important thing you can do is clean and replace your filters frequently. Also, a system heats and cools more evenly when the blower is in the “on” position. The blower provides constant air movement throughout the home, and allows for better filtration. Finally, shades, drapes, shutters, or screens should be installed on windows that are exposed to extreme sunlight.

There is no exact answer for how long your system should run during each cycle. The average air conditioner is sized to remove the heat from your home as fast as it comes in, on a 110° day. Therefore, ideally, on a 110° day the system should be able to keep up with the incoming heat, but not gain on it and be able to turn off. The cooler it is below 110°, the more the system will cycle on and off.

Every time your system starts up, it will use a lot of electricity and not produce much cooling. Usually a system that is too small to cool the home is more economical to run but delivers less comfort. Even though it runs nonstop, it will usually consume less power than a larger system that cycles on and off. As a rule of thumb, a unit that is either on or off is less expensive than one cycling on and off.

The air temperature your system produces depends on the temperature of the air going into the system. Generally, the air produced should be 18°-20° below what enters the system. So if the air entering the system is 80°, the air exiting should be about 60°-62°. However, that only works on a system that has been running at least 15 minutes on a warm, dry day with a home that is about 80° inside. On a mild day, with an indoor temperature in the low 70’s, or during humid conditions, the air coming out may only be 15°-17° cooler than what enters.

Obviously the time of year becomes a big factor for desired temperature settings. In the summer months the average temperature setting is 78°-80°, in the winter 70°-72° seems to be the most common setting. Remember, when leaving your house, try to avoid drastic temperature changes. Do not set your temperature back more than 5°; this will cause your unit to work harder to achieve the desired temperature setting.

Different programmable thermostats offer many different features. However, because they are electronic, they are all more accurate and efficient than thermostats that contain mercury. With programmable thermostats you can control the temperature in your home at different times of day without ever touching your thermostat. Because everything is automatic, you will never forget to change the setting on your own.

For optimum efficiency and filtration, we recommend that you replace your disposable filters at least once a month. If you have washable filters, they should be cleaned once a month.

You should have maintenance done on your air conditioning system twice a year. This not only ensures maximum efficiency, it enables us to foresee any possible problems that may occur in the near future. Our Comfort Assurance Program (CAP) plan is specifically designed to keep your air conditioning system running at its peak efficiency year-round.

The most important maintenance you can do is to change your filters regularly. Ground mounted outdoor units need to be kept clear of debris, clutter; weeds or landscaping that can grow too close and reduce the airflow to the unit. Also, keep pets away from the unit because pet urine can cause expensive damage. Use caution with a weed trimmer around the unit to prevent damaging control wiring. Any additional maintenance should only be performed by qualified personnel.